Projets:Imprimer filament flexible

From wikilab
Revision as of 07:38, 9 December 2019 by Delphine (talk | contribs)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search

Imprimer avec Alphawise

Nous avons imprimé avec la Alphawise du Ninja Flex semi flexible avec les paramètres suivants :

matériau : Ninjaflex Ø 1,75 mm imprimante : Alfawise U30 diamètre de buse : 0,4 mm épaisseur de couche : 0,15 mm vitesse : 30 mm/s max température de la buse : 230 °C température du plateau : 60 °C flow : 130 % désactiver la rétractation

Imprimer avec ultimaker 2+

Le filament flexible est très difficile à imprimer sur les Ultimakers mais c'est possible !

Il faut utiliser du TPU shore 95A de Polymaker et qui se nomme Polyflex TPU 95 : https://eu.polymaker.com/product/polyflex-tpu95/

Données matériau à copier sur le fichier de la carte SD

[material]
name=PolyFlex
temperature=230
temperature_0.40=230
retraction_length_0.40=6.00
retraction_speed_0.40=35.00
temperature_0.25=195
retraction_length_0.25=6.50
retraction_speed_0.25=25.00
temperature_0.60=220
retraction_length_0.60=6.50
retraction_speed_0.60=25.00
temperature_0.80=240
retraction_length_0.80=6.50
retraction_speed_0.80=25.00
temperature_1.00=240
retraction_length_1.00=6.50
retraction_speed_1.00=25.00
bed_temperature=60
fan_speed=20
flow=102
diameter=2.85

Profil Cura

 [general]

version = 4
name = Polymaker PolyFlex
definition = ultimaker2_plus

[metadata]

type = quality_changes
quality_type = normal
position = 0
setting_version = 6
[values]
bottom_layers = 3
brim_line_count = =math.ceil(brim_width / (skirt_brim_line_width * initial_layer_line_width_factor / 100.0))
brim_width = 5
cool_fan_speed = 20
fill_outline_gaps = True
infill_pattern = cubic
infill_sparse_density = 15
initial_layer_line_width_factor = 100.0
optimize_wall_printing_order = True
outer_inset_first = True
retract_at_layer_change = True
retraction_extra_prime_amount = 0.1
roofing_layer_count = 1
skirt_brim_minimal_length = 100
slicing_tolerance = exclusive
speed_infill = 40
speed_layer_0 = 20
speed_print = 50
speed_roofing = 30
speed_topbottom = 30
speed_travel = 80
speed_wall_0 = 35
speed_wall_x = 35
top_layers = 4
travel_compensate_overlapping_walls_0_enabled = True
wall_line_count = 3
z_seam_type = shortest